ASTM A333 Gr. 6 Seamless Low Temperature Carbon Steel Pipe

• Customization: Available
• Type: Seamless
• Technique: Hot Rolled
• Model NO.: low temperature carbon steel pipe
• Material: Carbon Steel
• Surface Treatment: Black
• Usage: Low Temperature Service Pipe
• Section Shape: Round,Rectangular,Square etc
• Material Name: Low Temperature Carbon Steel
• End Type: Be/PE
• Length: as Client′s Requirement
• Size: 21.3mm*2.17mm-610mm*30.96mm
• Delivery Condition: Normalized,,Quenched+Tempered
• Surface Protection: Varnish,Oil Coating,or Black Painting
• Transport Package: in Bundles with Steel Strips/Pallet
• Specification: CE
• Trademark: DERBOSTEEL
• Origin: China
• HS Code: 74000000
• Production Capacity: 100000 Ton/Month

Product Description

Product: A333 Gr.8 Gr.6 Seamless Low Temperature Carbon Steel Pipe

1.Carbon Steel Seamless Pipe for Low Temperature Service Technical Parameters

Standard		ASTM A333/ASTM A334
Grade( Material)		Grade1, Grade3, Grade4, Grade6, Grade7, Grade8, Grade9, Grade10
Minimum Order Quantity		1 PCS
Outside Diameter Ranges		21.3MM-610MM
Wall Thickness Ranges		2.17MM-30.96MM
Length(negotiable)		For 20Ft Container	4.8m-5.8m
		For 40Ft Container	4.8m-12m
		Most common choice	5.8m, 12m
Type	Seamless	Hot Rolled
Cap (negotiable)		Protection Caps at Both Ends
Pipe End	Plain end	All sizes
	Bevel end	Pipe size above DN50, and the thickness should greater than 3.2mm
Our advantages		·Diverse products(Steel pipes, pipe fittings, other fittings)
		·Any third party inspection is accepted by we company.
		·Quick response in quotation,delivery,after-service.
		·Focus on pipe & tube solution for project application.

Quality Control:
Our quality control department consists of experienced technicians. These personnel strictly control the whole production procedure, from introduction of raw materials to finish products. They ensure high quality products for our customers.
 

Chemical Composition and Mechanical Property For ASTM A333
Steel Grade	Chemcial Composition						Mechanical performance
	C(Max)	Si	Mn	P(Max)	S(Max)	Ni	Tensile strength (Min)		Yield Strength (Min)
							psi	Mpa	psi	Mpa
Grade 1	0.3		0.4-1.06	0.025	0.025		55000	380	30000	205
Grade 3	0.19	0.18-0.37	0.31-0.64	0.025	0.025	3.18-3.82	65000	450	35000	240
Grade 4	0.12	0.08-0.37	0.5-1.05	0.025	0.025	0.47-0.98	60000	415	35000	240
Grade 6	0.3	0.10(Min)	0.29-1.06	0.025	0.025		60000	415	35000	240
Grade 7	0.19	0.13-0.32	0.90(Max)	0.025	0.025	2.03-2.57	65000	450	35000	240
Grade 8	0.13	0.13-0.32	0.90(Max)	0.025	0.025	8.4-9.6	100000	690	75000	515
Grade 9	0.2		0.4-1.06	0.025	0.025	1.6-2.24	63000	435	46000	315
Grade 10	0.2	0.1-0.35	1.15-1.5	0.035	0.015	0.25(Max)	80000	550	65000	450
Grade 11	0.1	0.35(Max)	0.6(Max)	0.025	0.025	35-37	65000	450	35000	240

 

Steel Grade	Impact Temperature Requirement For ASTM A333
	ºF	ºC
Grade 1	-50	-45
Grade 3	-150	-100
Grade 4	-150	-100
Grade 6	-50	-45
Grade 7	-100	-75
Grade 8	-320	-195
Grade 9	-100	-75
Grade 10	-75	-60
Grade 11	-320	-195

Please do not hesitate to contact me  if you have any queires on our products ! we will give techncial support and quote to you in two hours.

Chengdu Derbo Steel focus on steel pipe and pipe fittings for more than 10 years.For Derbo is few owned-stated steel mills agent,so please believe that we can supply the best price to you with good quality!