| Customization: | Available |
|---|---|
| Type: | Seamless/Welded |
| Technique: | Smls/ERW/LSAW/SSAW |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Standard | API 5L | ||
| Grade | PSL-1 | API 5L - Gr.B/X42/X46/X52/X60/X70 etc. | |
| ( Material) | PSL-2 | ISO3183 - L245/L290/L320/L360/L415/L485 etc. | |
| Minimum Order Quantity | 1 Ton | ||
| Outside Diameter Ranges | PSL-1 | 0.405-80(in) or 10.3mm-2032mm | |
| PSL-2 | 4 1/2 -80(in) or 114.3mm-2032mm | ||
| Wall Thickness Ranges | SCH10~SCH160 Or STD,XS,XXS Or 1.73mm~59.54mm | ||
| Length | For 20Ft Container | 4.8m-5.8m | |
| (negotiable) | For 40Ft Container | 4.8m-12m | |
| Most common choice | 6m, 12m | ||
| Type | Welded | ERW,LSAW/SSAW | |
| Seamless | Cold Drawn,Hot Finished,Hot Expanded | ||
| Cap (negotiable) | Pipe size should under DN600 | ||
| Pipe End | Plain end | All sizes | |
| Bevel end | Pipe size above DN50, and the thickness should greater than 3.2mm | ||
| Our advantages | ·Diverse products(Steel pipes, pipe fittings, other fittings) | ||
| ·Any third party inspection is accepted by we company. | |||
| ·Quick response in quotation,delivery,after-service. | |||
| ·Focus on pipe & tube solution for project application. | |||
| Minimum Thickness | |
| Nominal Size of Pipe | Minimum Thickness of Normal(n)Coating ,in mm |
| Up to DN100 | 1.8 |
| Over DN100 up to DN250 | 2.0 |
| Over DN250 to Below DN500 | 2.2 |
| From DN500 to Below DN800 | 2.5 |
| From DN800 | 3.0 |
| The minimum coating thickness shall be 0.7mm greater (reinforced(v)type) where coatings will be subjected to particularly high mechanical stress. Along any 1m length of pipe,the coating thickness maybe up to 10% less than the minimum required,provded the thinner area does not cover more than 5cm2 |
|
| External Coating | |
| Coating type | Coating Standard |
| 3LPE/3LPP | DIN30670-1991,CAN/CSA Z245,21-2010,ISO21809-1-2009 SY/T 0413-2002,GB/T23257-2009 |
| 2LPE/2LPP | SY/T 0315-2002,GB/T23257-2009,ISO21809-1-2009 |
| FBE(Fusion-bond epoxy) | SY/T 0315-2005,AWWA C213-2001,CAN/CSAZ245.20-2010,ISO218909-2-2007,API RP5L9-2001 |
| Bitumen coating Enamel &Tape hot-applied |
BS534-1990,AWWA203-2002,AWWA214-2000 |
| Liquid epoxy coating | AWWWA C210-2007 |
| Polyurethane insulated coating | SY/T0415-1996,CJ/T114-2000.EN253-1994 |
| Internal Coating | |
| Liquid Epoxy Coating | AWWAC210-2007 |
| FBE | AWWAC213-2001 |
| Cement Mortar Lining | BS534-1990,AWWA C205-2001 |
| Bitumen Coating | BS534-1990 |
){kind=link}