ASTM A333 Grade 6 Low Temperature Carbon Steel Pipe

• Customization: Available
• Type: Seamless
• Technique: Cold Drawn
• Model NO.: ASTM A333 Grade 6
• Material: Carbon Steel
• Surface Treatment: Varnishing
• Usage: Low Temperature Service Pipe
• Section Shape: Round
• Surface Protection: End Plastic Caps Covering Both End
• Delivery Condition: Normalized, Quenched+Tempered
• End Finish: Beveled Ends
• Transport Package: in Bundles Tied with Steel Strips
• Specification: 21.3mm*2.17mm-610mm*30.96mm
• Trademark: DERBOSTEEL
• Origin: China
• HS Code: 74000000
• Production Capacity: 100000 Ton/Month

Product Description

Low Temperature Carbon Steel, ASTM A333 Grade 6

1. MTC is supplied together with the pipe
2. Any third party inspection is acceptable
3. Do business based on mutual benefit

Standard		ASTM A333
Grade( Material)		ASTM A333 Grade1, Grade3, Grade4, Grade6, Grade7, Grade8, Grade9, Grade10
Minimum Order Quantity		1 Ton
Outside Diameter Ranges		114.3mm~609.6mm
Wall Thickness Ranges		SCH5~SCH160  Or  STD,XS,XXS  Or  3.05mm~ 59.54 mm
Length(negotiable)		For 20Ft Container	4.8m-5.8m
		For 40Ft Container	4.8m-12m
		Most common choice	5.8m, 12m
Type	Seamless	Hot Rolled
Cap (negotiable)		Protection Caps at Both Ends
Pipe End	Plain end	All sizes
	Bevel end	Pipe size above DN50, and the thickness should greater than 3.2mm
Our advantages		·Diverse products(Steel pipes, pipe fittings, other fittings)
		·Any third party inspection is accepted by we company.
		·Quick response in quotation,delivery,after-service.
		·Focus on pipe & tube solution for project application.

18 IN. SCH20 Pipe, Seamless Material: Low Temperature Carbon Steel, ASTM A333 Grade 6 Ends: Bevelled for Welding per ASME B16.25 Design/Dimen: ASME B36.10 Other: EXTERNAL COATING AS PER SPEC 20041-0000-L40-SP-00008 " SPECIFICATION POUR
20 IN. SCH20 Pipe, Seamless Material: Low Temperature Carbon Steel, ASTM A333 Grade 6 Ends: Bevelled for Welding per ASME B16.25 Design/Dimen: ASME B36.10 Other: EXTERNAL COATING AS PER SPEC 20041-0000-L40-SP-00008 " SPECIFICATION POUR

Quality control:
Our quality control department consists of experienced technicians. These personnel strictly control the whole production procedure, from introduction of raw materials to finish products. They ensure high quality products for our customers.

Our job is to serve...And we take it very seriously.

We specialize in this field for several years, is one of the largest suppliers of different steel pipe/tube, pipe fittings, which according to DIN, ASTM, ANSI, JS, BS and so on international standard, with good quality and pretty competitive price.

Should you have any questions, pls do not hesitate to contact me.
- - - - - - - - - -

Best Regards,
Chengdu Derbo Steel Co., Ltd

CHEMICAL COMPOSITION (CAST ANALYSIS) IN%
Steel grade	Delivery condition	C Max	Si Min	Mn	P max	S max
GRADE 6	Heat-treatment	0.30	0.10	0.29-1.06	0.025	0.025
MECHANICAL PROPERTIES
Steel grade	Yield strength Min (Mpa)		Tensile strength Min(Mpa)	Elongation A Min(%)	Impact test (J)
GRADE 6	240		415	AS PER ASME SA333/ASTM A333	AS PER ASME SA333/ASTM A333